Logo

What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?

10.06.2025 03:35

What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?

So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.

One

This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.

Has anyone ever worn leather pants? Are they comfortable?

It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.

Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.

nine

Why is Matt Gaetz being investigated but not Sarah (Tim) McBride? Why do we only care about grooming when it's the Republicans doing it?

Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.

What is lightning?

2024–10–16 [ OO OLAOYE OYEBODE ]

Teens like me, what are your expectations when entering adulthood?

At one ohm, the resistor has a maximum of 1 watt power.

“ A fuse is a device which protects the (circuit) against overload and short circuit.”

This is where the MOV conducts again, and dissipated the energy.

How do you identify a woman player?

This device then solves the entire problem.

“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”

So, the voltage could go up to 500 volts, and the fuse will not open up.

Reggie Miller Had Such a Fired-Up Reaction to Tyrese Haliburton's Game-Winning Shot - Sports Illustrated

Can the fuse protect the electronic devices from lightning instead of a surge protector.

Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.

the problem then depends on "how fast does the fuse operate?".

How can I control my daily masturbating habit?

One is “what exactly is in a ‘surge protector’ ? ”

Edit 2024–10.

This is 'the assistant's answer'

Can adults grow new brain cells? - Live Science

He then describes Rainy Season and Lightning.

Here is a simplified AC power diagram.

A circuit breaker is similar, but is resettable.

Atheists, there is a god up there in heaven and he loves you so much that he sent his son to die the worst death imaginable and then to turn into a zombie all to save you from sin. Why do you reject him?

These devices are installed between the “hot” and “neutral” and protective ground.

a photo is worth a thousand words.

2024–10–11 [Bobby Sanchez Bobby Sanchez ].

How can I stop overthinking and take action more quickly?

This one hit behind the barn.

There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.

There are two important concepts here.

“Very Odd” New Sea Monster Identified After Decades of Mystery - SciTechDaily

This is where this question deviates from being a 'generic' question, and becomes more specific.

In schematic diagrams this is the symbol for a fuse:

Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".

It seems Mohan does not understand the difference between a comment and an Answer.

At least they know the answer if they wanted it.

2024–10–00 [ Ammar Mahdi ] Ammar Mahdi

Now when you have a certain ac resistance, then a current flows in a loop.

P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.

Upvotes:

Barnstars:

“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”

An AC voltage/ current source, and an ac inductive load.

OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.

what exactly is a ‘surge’ protector?

The other is “what does a “fuse” do?”

For this case there are devices called Metal oxide varistors (MOV).

But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).

This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.

so, what happens?

I post the exact comment here.

But… the neutral is now “floating” because of the 1 ohm resistance.

If the nominal power is 4,000 watts then the current at 230volts is 16 amps.

So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.

Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.

but I think this circuit , shows a few more pieces.

He then describes the function of a fuse.

At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.

Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.

[old diagram got deleted by accident]

(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).

The MOV will conduct when the voltage exceeds 50% of line voltage.

And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.

These are simplified answers to the original question, and does not change anything I wrote above.

Because the load is inductive, the current lags the voltage.(by a bit).

This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.

The third is lightning and “how it gets conducted into a home.”

[image of Common-mode choke]

It also is a device that limits the change in current flow.

He then asserts :

(Dc diagram shown, AC is similar).

What does a fuse do?

2024–10–11 [Victor Olarewsju Victor Olarewaju ]

When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.

First Sentence:

There are three different concepts here that are getting confused.

2024–10–14 [Omar Gharbi Omar Gharbi ]

eight

but this device (an Inductor) … impedes the rapid changes in the current.

so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.

The bolt then partially travels down the line to your home.

2024–10–10[John johnson John Johnson ]

This is the picture of an electronic coil of wire wound around a core of magnetic material.

A fuse is a non-resetable over current circuit protector.

But it can get overloaded, and no longer works.

2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?